Midyear 1973 Tool Kit (same for 911S, 911E and 911T)

The mid '73 911 factory tool kit was offered for only about 6 months. It had a tool kit bag that had no inner liner, an interior upper flap, and was held together with a tie string rather than spring-actuated clasps. The screwdriver was now a single handled version with a reversible slot and philips shaft. The five open-end wrenches now stated "SELECTED SPECIAL STEEL". The spark plug wrench was modified. The rest of the tools remained the same.

The tools included (changes from the earlier 69-73 kit shown bold)

• a single handled screwdriver with a reversible slot and philips shaft
• a 19MM lug wrench with a straight tapered tip
• a 10MM allen wrench (stating "DIN 911 SW10 KLEIN GERMANY")
• a 19x22 double-ended box wrench (stating "CHROM-VANADIUM")
• a P208 v-belt wrench
• a modified spark plug wrench
• pliers either like the earlier 911's or pliers with a flat cutting edge/cross-hatching on the handles with "HAPEWE" on both handles/"WEST GERMANY" on the inside of both handles
• five double open-ended wrenches sized 8x9, 10x11, 12x13, 14x15, 17x19 (stating "SELECTED SPECIAL STEEL")
• a v-belt
• and a fuse pack

Although shop towels and the Messko air pressure gauge had not been included in tool kits in many years, they could be purchased separately at the dealer.